Oual Power Supply

Pulsating DC

COMP. CONTROLLED EIGHT OUTPUTS-(FIG.#6)

The power supply is mounted in the lower end of the bottom of the case. All of it's associated components are connected closely around it, such as the IC regulators (both on the same heat sink), the bridge rectifiers and capacitors. The output from the regulators is connected directly to the back of the front panel. The AC leads are connected to the back of the front panel with electrical twist connections.

The only precaution is that the TRIAC and all other locations where AC is involved be insulated properly. BE CAREFUL when working with 110 volts ACI m

0 0

Post a comment